How to Install a Ghost Immobiliser
A ghost immobiliser can be a powerful deterrent to car thieves. By combining this device with other security systems and staying vigilant, you can create an effective defense against modern, technologically-savvy thieves.
A ghost immobiliser can protect your vehicle from hotwiring, key cloning, and relay car theft by requiring a pin code to start the engine. It works by using buttons on your steering wheel and centre console, making it invisible to thieves.
Identifying the Wires
With increasing instances of vehicles being taken away without the owner's key, it is essential to secure your vehicle. While thieves might be able to copy your key fob or even steal your vehicle by hacking its system, a ghost immobiliser adds an additional layer of security by blocking all signals coming from the key fob, making it impossible to start your vehicle without entering a PIN.
While you could install a ghost immobiliser yourself, it is best to have an expert technician do the job for you. Learn Additional will know where to install the device and how to connect it to your vehicle's wiring. Installation can be complicated and it's crucial that all connections are made properly to avoid damage or malfunctions.
Wearing safety equipment and working in a place that is well-lit will ensure you get the best results. It is also recommended to read the user manual to familiarise yourself the wiring system. This will assist you in identifying the wires required for installation and ensure that you have the right tools and parts to do the job right.
After the wiring is connected, you can reconnect your battery and test to verify that the system is functioning properly. To avoid electrical issues be sure that the battery's terminals are secure. Finally, you should mark the CAN H and L wires with labels or tape so that you can keep the track of them during the installation process.
The Ghost Immobiliser allows you to put your car in Transport Mode if you want someone else to drive it for a short period of time, for example, for valet parking, or if the vehicle requires to be maintained. This lets you input the code via the service button that is located on the steering wheel, the centre console, or door panels, and it will then enter the PIN code change mode.
Some thieves attempt to evade the ghost immobiliser using spoofing or jamming devices to block or send false signals to the system. This can be prevented by investing in anti-jamming technologies and monitoring your Ghost immobiliser to detect signs that it's been tampered with.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security tool designed to stop car theft. It utilizes cutting-edge technology to detect the engine and then deactivate it when the correct PIN is entered. This prevents the vehicle from being taken by thieves. The system is highly effective and stealthy, as it does not have visible indicators to stop criminals. You may need to remove your device for maintenance, upgrades, or when selling your car.
This process requires specialized tools and expertise since you'll be working with wires, and bypassing certain factory parts. It is also essential to follow the step-by- step instructions provided by the manufacturer. You should also seek advice from an experienced mechanic or auto electrician, especially if you do not have any experience working on cars.
After identifying the wires and disconnecting them after that, you must verify the condition of your battery. Ensure that it is clean and free of corrosion and that the connections are secure. It is needed to ensure that it's sturdy enough to meet the electrical requirements of a security system aftermarket.
After you have disconnected the wiring, you can then remove the ghost immobiliser. Utilize wire cutters or strippers to carefully disconnect the wires, making sure not to scratch the wires or their terminals. Make sure to label each wire so that you can reconnect them properly in the future. If the wires were connected and you want to use a heat resistant tool to break the connection. To avoid short-circuits, it is essential to wrap the wires with insulation tape or heat shrink tubing.
Reconnect the wires with the constant 12V power source. Use the fuse tap to secure the connections using fuse. Connect the grounding wire to a solid grounding to the vehicle's chassis.
Once you have reconnected the wires, turn off your vehicle and enter the PIN. Then, restart the engine. If the engine doesn't start, then you have successfully removed the ghost immobiliser.
Making the Connections
Ghost immobilisers are an affordable solution to increase the safety and security in your vehicle. It connects to your car's CAN bus system, which intercepts signals and stopping the engine from starting unless the correct PIN code is entered. This device is virtually impossible to circumvent. It's a great option for those who want security and peace of mind. It can lower your insurance rates when combined with a Thatcham Approved Tracking System.
Reviewing and obtaining the wiring diagram for the vehicle model you are considering is crucial in the process of installing. The diagram serves as a reference to identify the wires needed to make precise connections. Using the proper connections or soldering techniques will ensure that the connection is durable and secure.
The wires that connect the Ghost immobiliser to the CAN bus need to be correctly identified and connected. Use small labels or tape to identify the CAN L and H wires. This will avoid confusion during installation. These wires are located in different locations on every vehicle. It is important to refer to the wiring diagram or online resources in order to identify the wires.
After the correct wires are connected After the correct wires have been connected, the power to the Ghost immobiliser can be restored. It is a good idea to test the immobiliser. Start the engine, but do not enter the code. This will confirm that the immobiliser was installed correctly and functioning exactly as it was intended to. It is crucial to test your immobiliser regularly. This will help you detect any issues or problems early.
Another benefit of the ghost immobiliser is that it can be installed in a matter of minutes and doesn't require any cutting or modifications to the wiring inside your vehicle. It is also an excellent choice for those who wish to add extra security to their vehicles, since it can be used together with a Thatcham-approved alarm or tracker, which will send a notification to your phone or tablet when the vehicle is being altered.
Mounting the Unit
The Ghost immobiliser is a great deterrent to car thieves, especially when it is paired with a GPS tracking system. The device makes use of buttons on the center console, doors and the steering wheel to create a unique sequence you can only recognise. This stops your car from getting started. The unit is also weatherproof and tamper-proof. It comes with a 3 year warranty and is recommended by many insurance companies.
When installing the system it is essential to follow the directions carefully. If you're not sure, it is best to consult a professional. A wire stripper and multimeter are essential tools for identifying the wires and making precise connections. You should also buy insulation and electrical tape to protect your connections from damage. After the installation is completed it's a good idea check the device to confirm that it's working as intended.
Ghost immobilisers are an excellent way to secure your vehicle especially in areas that have high rates of crime. It prevents key cloning, ECU swapping and other security risks, and can be used in conjunction with an iPhone app for easy management and monitoring. It's a favorite choice for those who own vehicles who want to safeguard their investment. It's simple to install.
The Ghost II immobiliser features a sleek design and low-profile that makes it difficult to spot for thieves. It connects to the CAN (Controller Area Network) system of your vehicle and blocks the engine from being started without a PIN code being entered. The PIN code is generated using a unique sequence of keys on the steering wheel or centre console, or on the doors and can be changed at anytime. The device is also tamper-proof and includes an GPS tracking system that will aid police in locating your car in the event of theft. It's an excellent option to protect your vehicle from thiefs and it's fully Thatcham certified.